Chassis The chassis consists of a brushed anodized aluminum/ black acrylic sandwich 10x20x10mm. The benefit of this design is in its increased damping, dissipation and anti- vibration abilities. The aluminum plates are also slow-baked to increase rigidity and resistance from scratching. Additionally, the chassis is mounted to 3 solid aluminum height adjustable resonance damping feet, which in combination even further add to the elimination of external vibrations. Bearing Air-Bearing system using shielded opposing magnets floating the platter on a cushion of air. This reduces friction and mechanical noise associated with traditional bearings. Platter The platter is precision machined on an automated CNC lathe. The platter is then Hardcoat anodized to increase its hardness, density, abrasion resistance and overall dampening abilities. The finished thickness after machining and anodizing is 86mm at a weight of 12.4kg/27.34lbs. Motor Assembly The AC synchronous motor is custom manufactured in Europe according to our requirements, which include changing the iron shaft to ceramic to eliminate mechanically noise and increasing the torque to handle our heavier platters. The motor is housed in it’s own standalone aluminum case which negates any vibrations from flowing directly into the table. GRS System The AMARI LP-300 comes standard with our GRS System (Generate Rotate, Synchronize) which is a combination of clean regenerated power and precise measurement of the platters revolutions Together the un-fluctuating power generated and the optical measurement system can lock the a precise and consistent rotation into place free from a fluctuating wall power supply. Other standard features on the LP-300 are an Amari Slow-Pitch VTA (20-25mm height adjustment) with quick swap sockets and an arm mount adjustable for arm lengths from 210-230mm.